Позвънете на тел.: + 359 882 025 257
+ 359 2 928 6441


БЕЗПЛАТНА ДОСТАВКА над 200.00 лв. до 20 кг.

 

К-т за зацепване на двигатели BMW M41 M51 E34 525 E36 318 325 E38 725 tds D E39 525 Opel Omega Land Rover Range Rover II 2.5 TD-36ETTSB43-ZIMBER TOOOLS

Бъдете първи - добавете мнение

К-т за зацепване на двигатели Bmw, Land Rover, Vauxhall/opel -36ETTSB43-ZIMBER TOOOLS.


Diesel Engine Setting/locking Kit - Bmw, Land Rover, Vauxhall/opel -36ETTSB43-ZIMBER TOOOLS. MOTOR Adjustment Tool Set for BMW M41 M51 E34 525 E36 318 325 E38 725 tds Diesel E39 525 Opel Omega Land Rover Range Rover II 2.5 TD Puller Injection Pump Timing Chain Crankshaft Camshaft Special Tool Chain Tensioner.Setting Locking Tool Kit includes the camshaft setting plate and crankshaft TDC location pin required to ‘set’ and ‘lock’ the engine in its correct timing position. The kit also provides camshaft and injection pump chain tensioner retaining pins and the essential injection pump remover which is used when removing sprockets and/or chains as well as the injection pump. This tool is additionally used to retain and support the sprocket and timing chains in position when the pump has been removed. MODELS: BMW: ‧ Seria 3 – 318 1.7 tds E36 (94-00), 325 2.5 td/ tds E36 91 – 99 ) | – Seria 5 – 525 2.5 td/tds E34/E39 (90-00) | ‧ Seria – 7 – 725 2.45 tds E38 (95-02) | ‧ Land Rover; Range Rover 2.5 (94-02), – Vauxhall/Opel; Omega-B 2.5 D Turbo (94-01). ENGINES: BMW: M41, M51; Land Rover 256T M51 | Vauxhall/Opel: X25DT

Availability: Не е налично

149,80 лв.
Каталожен №: ZR-36ETTSB43
ZIMBER-TOOLS

Описание на продукта

Подробности

К-т за зацепване на двигатели Bmw, Land Rover, Vauxhall/opel -36ETTSB43-ZIMBER TOOOLS.

MOTOR Adjustment Tool Set for BMW M41 M51 E34 525 E36 318 325 E38 725 tds Diesel E39 525 Opel Omega Land Rover Range Rover II 2.5 TD Puller Injection Pump Timing Chain Crankshaft Camshaft Special Tool Chain Tensioner.Setting Locking Tool Kit includes the camshaft setting plate and crankshaft TDC location pin required to ‘set’ and ‘lock’ the engine in its correct timing position. The kit also provides camshaft and injection pump chain tensioner retaining pins and the essential injection pump remover which is used when removing sprockets and/or chains as well as the injection pump. This tool is additionally used to retain and support the sprocket and timing chains in position when the pump has been removed. MODELS: BMW: ‧ Seria 3 – 318 1.7 tds E36 (94-00), 325 2.5 td/ tds E36 91 – 99 ) | – Seria 5 – 525 2.5 td/tds E34/E39 (90-00) | ‧ Seria – 7 – 725 2.45 tds E38 (95-02) | ‧ Land Rover; Range Rover 2.5 (94-02), – Vauxhall/Opel; Omega-B 2.5 D Turbo (94-01). ENGINES: BMW: M41, M51; Land Rover 256T M51 | Vauxhall/Opel: X25DT.

Motor Adjusting Tool Set for BMW diesel engines (5 pieces)

For the professional engine repair, for example, to change the timing chain, the removal and installation of most types of the camshafts, testing and setting of the camshafts control time, etc.
For BMW diesel engines M41 (1665 cm³, 90HP) and M51 (2498 CM³, 116 to 143 PS)
For the BMW models:
E34 525TD, 525TDS
E36 318tds, 325td, 325tds
For BMW models E38 725tds
BMW models E39 525td, 525tds
Also suitable for identical engines in Opel Omega B 2.5 TD, ID 25DT, X25DT
As well as equivalent motors in the land rover range rover II (P38) 2.5 TD
Includes a crank shaft locking device, can be used in the same way as OEM 11 2, 300
A camshaft locking device, can be used in the same way as OEM 11 3 320
A remover for injection pump wheel, can be used in the same way as OEM 13 5 120
2 locking pins for chain tensioner, can be used in the same way as OEM 11 3 340
Complete in plastic case
Tool in the highest quality design
For a long service life in daily workshop use

Допълнителна информация

Допълнителна информация

Каталожен № ZR-36ETTSB43
Производител ZIMBER-TOOLS

Ревюта

Споделете Вашето мнение

Само регистрирани потребители могат да оставят мнението си. Моля, влезте или се регистрирайте

Ключови думи

Ключови думи

Други потребители са маркирали този продукт със следните ключови думи:

Използвайте празни места, за да отделяте ключовите думи. Използвайте единични кавички (') за фразите.

Може да се интересувате и от следните продукт(и)

Powered by DigiNET